Refine Search

Category

Absolute

5 Items
  • «
  • 1
  • »
Marksman PFT Series Filter Elements product photo Primary L

Marksman PFT Series Filter Elements

High Capacity Pleated Polypropylene Filter Elements

  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag vessels with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Pall vessels
  • Unique sealing device adjusts to fit in most conventional bag filter vessels
  • High surface area for long service life
  • All polypropylene construction
  • Wide chemical compatibility

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Products in this datasheet may be covered by one or more patents, including US 7,473,360.


Segment

Cartridge Filters

Application

Absolute
Nexis® High Flow Series Filter Elements product photo Primary L

Nexis® High Flow Series Filter Elements

"The Nexis®High Flow filter is a large-diameter, coreless, single-open-ended depth cartridge with inside-to-outside flow. It is available in a variety of proprietary melt-blown filter media in ratings from 10 µm to 100 µm. With its large diameter (152.4 mm [6 in]), desired results can be achieved in high flow rate applications with significantly fewer elements and smaller housings.

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



Segment

Cartridge Filters

Application

Absolute
Poly-Fine II Series Filter Cartridges product photo Primary L

Poly-Fine II Series Filter Cartridges

  • Proprietary filter media produced by Pall for highly consistent performance
  • High contaminant-holding capacity
  • Wide chemical compatibility
  • Rigid polypropylene outer cage protects filter
  • All polypropylene one piece construction (except 0.2 micron)
  • Asymmetric polysulfone media used in 0.2 μm grade
  • Fast rinse-up to 18 Megohm-cm
  • Application- Specification-

    Performance Specifications

    Filter Grades:

    0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 50, 100 μm

    Recommended change-out differential pressure1

    2.4 bard (35 psid)

    Maximum forward differential pressure

    4.8 bard (70 psid) @ 20°C (68°F)
    2.8 bard (40 psid) @ 65°C (150°F)

    Food and water contact use

    Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

    Cartridge rinse-up

    Rinse-up to 18 Megohm-cm with a minimum of throughput.

    Purity

    Cartridges are free of resins, binders, and adhesives.

    Sterilization:

    Multiple autoclaving for 30 minutes at 121°C (250°F) under no end load conditions. In -line steam sterilization is not recommended. May be in-line sanitized with hot water at 82°C (180°F) for 1 hour.

    Product Specifications

    Materials of construction

     
    Filter Media:  
        PFT 0.2: Highly asymmetric polysulfone
        All other grades: Polypropylene
    Hardware: Polypropylene
    Sealing: Thermal bond
    Support material: Polypropylene
    Gaskets/O-rings: Silicone elastomer, nitrile, EPDM
    fluorocarbon elastomer, white nitrile,
    white silicone, expanded PTFE, FEP
    encapsulated silicone, high purity
    fluorocarbon elastomer, FEP
    encapsulated fluorocarbon elastomer,
    Kalrez2, white neoprene
     


    Dimensions (nominal):

     
    Outside Diameter: 6.6 cm (2.6 in)
    Lengths: 10.2 cm (4 in), 24.8 cm (9.75 in),
    25.4 cm (10 in), 49.5 cm (19.5 in),
    50.8 cm (20 in), 74.3 cm (29.25 in),
    76.2 cm (30 in), 99.1 cm (39 in),
    102 cm (40 in)
     

    1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
    2 Registered trademark of DuPont Dow.


    Segment

    Cartridge Filters

    Application

    Absolute
    Poly-Fine® ARD Series Filter Cartridges product photo Primary L

    Poly-Fine® ARD Series Filter Cartridges

    "Spiral Wound Absolute Rated Depth Filter Cartridge
    • Innovative depth filter cartridge technology
    • All-polypropylene components
    • Absolute rated at >99.9% efficiency with retention ratings from 0.5 to 70 microns
    • Proprietary filter media produced directly by Pall for highly consistent, reproducible performance
    • Cartridge free of surfactants, binders and adhesives
    • Graded pore structure provides pre and final filtration in one cartridge
    • Resists contaminant unloading even at high differential pressures

    For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



    Segment

    Cartridge Filters

    Application

    Absolute
    Ultipleat® High Flow Series Filter Cartridges product photo Primary L

    Ultipleat® High Flow Series Filter Cartridges

    The Ultipleat® High Flow filter is a large-diameter, coreless, single open-ended, pleated cartridge with an inside-to outside flow pattern.

    The filter's unique crescent-shaped pleat geometry, combined with its large 6-inch (152.4 mm) diameter and proprietary range of available Pall filter media, allows you to use significantly fewer filters and smaller housings for high flow-rate applications.

    For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



    Segment

    Cartridge Filters

    Application

    Absolute
    High Flow